I tried something a little different today. I filled up drove for a few miles (2-5) to make sure the ethanol percentage reading in bootmod3 had stabilized at e50. Then I pulled into a parking lot and flashed the car to the Stock Custom Rom map. After the stock map finished flashing I flashed the e50 stage 2 map. (It's the same that I posted the log for above.) I did a short log as I pulled out of the parking lot. The log shows the boost target peaking at around 40 psig and the MAP reading about 36.9 psig which is about 15 psi more than when I was at the dragstrip.
It looks like to get the most out of the bootmod3 e50 ots map you have to flash it back to the stock custom rom map first. I can wait to get it back out at the track and see what it does now.
Here's a map I did of a pull from a standstill after driving about 45 miles on the map. Looks about the same as the short pull map mentioned above.
https://bootmod3.net/log?id=660dd24192122b3ec77a799f
2022 M4 Competition Xdrive
Downpipes
Drop in air filters
Flex fuel
Bootmod3 OTS e50 stage 2 map.